How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning and hacking. It prevents the engine from running until it is started with PIN codes, which can be up to 20 characters in length.
It is undetectable by thieves, who are unlikely to be expecting this extra layer of security. Certain systems have an app which allows the owner to disable their immobiliser if they forget their PIN or use the service/valet mode.
Connecting the vehicle's CAN Bus
The Ghost 2 Immobiliser, a cutting edge security system, is able to be integrated directly into the ECU of your vehicle. It provides a discreet protection against thieves. It is extremely efficient and user-friendly, making it a valuable addition to your vehicle's security arsenal. But, as with any other anti-theft device, it's not impervious to failure and requires regular maintenance to ensure proper operation. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with one another over short distances without the necessity of a central control unit. It is designed to multiply electrical wiring in vehicles, saving on copper. ghost car immobiliser has many advantages, such as low cost and simple use.
In the majority of modern cars In modern cars, the CAN protocol is used to connect with a variety of systems, such as the engine management system (EMS), transmission controller, steering module, air conditioning controls and many more. It also transmits data from sensors like speed sensors and inputs, to control different features of the car. The CAN bus is used to monitor these diverse components, and can prevent the car from starting if they are in an unsafe state.
It is important to understand how the CAN bus operates and how it's secured. Using CAN bus could be a great way to enhance the features of your vehicle, but it's essential to protect it from threats like hackers and other hacker. The best way to do this is by installing firewalls and monitoring your CAN bus through software.
Ghost2's secluded control unit is concealed in the car's wiring harness or dashboard, removing the possibility of a burglar physically tampering with it. It is also impossible to reset a PIN or emergency code without having access to the car.
If you need to surrender your vehicle for servicing, valet parking, or any other reason, you can activate the Transport Mode. This feature will disable both the keyfob and ignition functions of the Ghost immobiliser. It will only be activated after the vehicle has travelled 31 mph for a period of 15 minutes.
How do you create a PIN code
The Ghost immobiliser is a powerful security system that guards your vehicle from thieves. The patented technology makes use of a PIN to disable the vehicle's engine and prevent it from starting without the right code, or an authorized fob/mobile. The system's subtle design is unnoticeable and also provides unbeatable protection against theft. The system is TASSA-certified and could save you substantial sums on your car insurance.
During the installation, Ghost enters a "learning mode" to record the sequence of buttons that are pressed to create unique pin codes. The installer will guide you through activating the system once the pin code has been created. Once activated, the Ghost system disables the vehicle's start motor unless you enter a valid pin or switch the vehicle into transport mode. This makes it difficult for thieves or cloners who want to hack or replicate your starter system.
It's easy to set up a Ghost immobiliser, however, you must follow the precise instructions included in the user's manual to ensure that it is operating properly. Hand tools and multimeters are a good way to check electrical values. Insulation tape and heat shrink tubing may protect exposed wiring Cable ties are essential for keeping everything tidy and secure. Also, make sure to test the system regularly to identify any potential issues and errors.
It is essential to test the system one last time prior to turning on the ignition. The Ghost immobiliser will be able to rearm itself after a period of 3 to 30 seconds, based on the vehicle model. It also has a Service/Valet mode that allows you to temporarily disable the system while servicing your vehicle or parking valet.
Idealy, the immobiliser will be hidden under the dashboard or behind the steering wheel. Use a small amount of duct tape or paint on the wires CAN H and L to make them easier to locate during testing. In addition the CAN H and L wires must be connected to a power source that is able to provide continuous 12V. It is important to check the connections again after testing, as an incorrect identification of these wires could cause the system to malfunction.
The system must be activated
A ghost immobiliser prevents your car from starting unless you press a series of buttons inside the car generally the steering wheel, door panel or central console. The sequence can be altered by the user at any time. Once the system is activated it is not able to be disabled by thieves and is a great option for anyone looking to secure their vehicle from theft.
The system is designed not to be detectable by modern diagnostic and code-grabbing technology. ghost immobiliser and tracker does not send radio signals which makes it difficult for thieves to find the device.
If the device is identified, it will stop the engine from starting and sound an alarm that is loud enough to scare away the thief. The device can be used to track the location of a vehicle which can help police recover the vehicle if it has been taken.
Contact Car Specalist Customs for a estimate or to discuss your options in Ghost immobiliser. We are fully trained to install a ghost immobiliser for your vehicle and will make sure it is concealed in a hard-to-reach area. We can also provide additional security measures like the wheel lock and kill switch to help protect your vehicle from thieves.
Disarming the System
It is important to know how to disable the Ghost immobiliser, if it's installed on your car. This will aid you in the event that you lock your keys in the car or if your battery goes out of. The system is based on a unique PIN code that only you know, so the immobiliser won't start your vehicle without entering this code. The most efficient method of entering the code is to press a set of buttons on your dashboard or the steering wheel. This is a lot easier than using a key fob. It also keeps others from copying the remote.
Ghost2 is noninvasive, unlike some aftermarket immobilisers that require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to function. Its standout feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to make use of signal boosters or clone your car key. It doesn't emit radio frequencies, which means thieves are unable to detect it.
The Ghost system also has a Transport Mode, which allows you to temporarily disable the security system in circumstances like transportation or servicing. This feature is useful if you are lending your vehicle to someone else without sharing your PIN code or if your vehicle needs to be protected even while you drive it. To activate Transport Mode simply press the service button five times within a period of 2 seconds. The Ghost system will confirm activation by 5 indication signals.
Save the emergency code in your vehicle in a safe place. Then, if you ever find yourself locked out of your vehicle, contact the technician or company who installed the system and they will provide you with the code. If you are unable to get in touch with them, you can seek out an authorized dealer. However, this may require verification procedures, and you could be charged for additional fees.
This system is not just convenient, but it can also safeguard your vehicle from theft, and also reduce insurance costs. Many insurance companies offer lower rates or financial incentives to install this anti-theft system.