Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discrete, does not use LED indicators or key fobs and is hidden within the wiring of the vehicle.
The user may also turn off the system for a short period of time by using Transport Mode when renting their car. This guide will take you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key cloning attacks, hacking attacks and relay attacks. The system is connected directly to the ECU of your vehicle and protected by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and is unable to be disabled by cutting circuits.
The system is easy to use, however it's essential to use a professional installation to ensure a secure and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's security package.
To avoid the accidental deployment of airbags or short circuits, the installer must first disconnect your battery. After the battery has been disconnected, the installer can safely begin working. Hand tools are essential for making precise connections and a multimeter can be used to check the electrical properties and safety. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring tidy. The Ghost Immobiliser user's guide will give specific instructions that are tailored to your model.
It is important to choose the right grounding spot that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and CAN L are connected to the proper ECU ports. The wires can be plugged into or soldered, depending on the model. Using a quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be turned on by the client after the installation is completed. This allows mechanics or valet parking to use the vehicle, without having to know the pin code. The customer must press the icon for service on the dashboard five times in 2 seconds. After that, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great option for those who rent out their vehicles often on platforms such as Turo. An immobiliser can lower insurance costs, as it greatly reduces the chance of theft.
Getting Started
You won't have a problem with an autowatch ignition device for those who want to safeguard your car from thieves. The device stops your car from running even if someone steals or copies your key. This is due to its sophisticated technology that is designed to stop the engine from running without the correct PIN code is entered.
The device works by connecting to the CAN bus network of your vehicle and allowing it to communicate with the ECU directly. It uses existing buttons on the dashboard and wheel to create a unique sequence that only you know, making it impossible for someone else to start your vehicle. This is the most secure security system that will safeguard your pride and joy and preserve its value should you decide to sell it in the future.
Installing a ghost ignition is an easy process, however, it's important to follow the directions carefully to avoid issues with electricity and system malfunctions. You'll need to locate a power supply of 12V and a suitable grounding for the chassis of your car. After that, you are able to begin connecting the wires for the immobiliser. Make use of high-quality connectors and soldering methods to create an effective connection. Make sure to shield the connections with heat shrink tubing or insulation tape, as well as other materials to prevent electrical short circuits.
After the wires have been connected, you are able to reconnect the battery and start the engine to test the immobiliser's functionality. When everything is functioning correctly, you can install it in a safe location beneath the dash or anywhere else in the vehicle. Make sure to cover it in a secure manner so that a thief cannot tamper with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car burglars. It offers superior protection against key cloning, hacking, and relay attacks, and it can't be disabled without knowing the code. The device is easy to use, and can be set into an option for a service valet so that your vehicle won't be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings, unlike other aftermarket systems that require the removal of circuit elements.
The system is also undetectable by thieves using diagnostic scanners. This is because the system does not transmit and receive radio frequency signals, and it uses CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. You can now start your vehicle and drive safely.
Once installed Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking while preserving the value of your car's pride and joy. If you have to surrender your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
sources tell me 'll require a constant power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This will reduce the chance of theft by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them with a label or tape. Check all connections for signs they're wearing out. Be sure to ensure that all connections are firmly in place, and properly protected. Make sure to test your Ghost Immobiliser once the installation is completed. This will make sure that the unit functions correctly, and that all connections are secure and insulated. Make sure to address any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your car's ECU to block the engine from starting without authorization. Its innovative technology protects your vehicle from hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the best security for your vehicle. The Ghost's unparalleled features, coupled with its discreet design makes it a sought-after option for both car enthusiasts and security conscious drivers.
It is crucial to follow the procedures for installation to ensure correct integration of the Ghost Immobiliser. Consult the wiring diagram of the vehicle as it will assist you in locating and connecting the wires. Then, you'll need to identify the power source as well as grounding points. Once these are found you'll be required to mark them so that they're easy to identify when installing. It's important to use high-quality materials and tools. Basic hand tools can help to make precise connections while a multimeter can confirm electrical values and guarantee security. Insulation tape and cable tie ensure that all connections are neat. A Ghost-specific user manual is also available.
It is crucial to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions as intended, preventing unauthorised vehicle start-ups. This step should be done regularly as part of your routine vehicle inspections in order to ensure that the system is working properly.
After the installation is completed, you can begin driving your car with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that nobody is able to escape with your car without the correct PIN. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts at theft or tampering. This lets you track your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those from the majority of major manufacturers. If you're interested in protecting your car using this advanced device, contact Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest guidelines and procedures when installing our products. This assures customers, insurance companies and law enforcement officials that all installations are performed in a safe and correct manner.